BBQ grill replacement Kit IGNITER ELECTRODE BATTERY

FOB Reference Price:Get Latest Price
US $2.5-5.5 / Piece | 2000 Piece/Pieces (Min. Order)
Supply Ability:
100000 Set/Sets per Month
Port:
NINGBO SHANGHAI
Report Suspicious Activity
Overview
Quick Details
Type:
Other Accessories
Place of Origin:
Zhejiang, China (Mainland)
Accessory Type:
igniter
Material:
Plastic
Packaging & Delivery
Packaging Details
carton
Delivery Time
30 DAYS

 

Universal replacement igniter kits

 

It inculdes:

1. IGNITER: YD1.5-3B

2. AA BATTERY

3. ELECTEODE WITH WIRE (LENGTH ADJUSTABLE)

4.1 PC SIDE BURNER + 1PC REAR BURNER

5. COLLECTOR BOX

6. PROTECTION COVER 

7.SCREWS + BOLTS + WASHERS + ZIP TIES +ELECTRODE CAPS + 1/8" GAS GAUGE

 

 

 Instruction

 

 The replacement igniter kits are widely used in kinds of burner.

 The igniter performs to the same high standard as your orignal igniter, providing years of enjoyable grilling.

 

Step 1, Bar or H burners

 Insert electrode assembly into collector box, fasten the electrode in place with electrode lock slide collector box to th  e burner. The screws pass through ports on the burner to hold the collector box in place. If your bbq has a side burner, proceed to step 3, otherwise continue to common steps.

 

 Step 2,Tube burner

 Fasten adjustable electrode to existing mounting points. fasten with bolt assembly. If there is not an appropriate hole for fastening hardware, carefully drill a 3/16 hole. calibrate the adjustable electride using the Gap Gauge to determine the distance between the elctrode and  metal burner. Bend and cut Adjustable electrode, so that it touches the Gap gauge. If your bbq has a side burner, proceed to step 3, other wise continue to common steps. you can use the second Adjustable Electrode to rig another tube burner.

 

Step 3, Side burner

 Fasten adjustable electrode to existing mounting points. fasten with bolt assembly. If there is not an appropriate hole for fastening hardware, carefully drill a 3/16 hole. calibrate the adjustable electride using the Gap Gauge to determine the distance between the elctrode and  metal burner. Bend and cut Adjustable electrode, so that it touches the Gap gauge. If your bbq has a rear burner, proceed to step 4, otherwise  continue to common steps.

 

Step 4, Rear burner

 Fasten adjustable electrode to existing mounting points. fasten with bolt assembly. If there is not an appropriate hole for fastening hardware, carefully drill a 3/16 hole. calibrate the adjustable electride using the Gap Gauge to determine the distance between the elctrode and  metal burner. Bend and cut Adjustable electrode, so that it touches the Gap gauge. Ideally choose a location with bare metal to gap the spark. Once complete, continue to common steps.

 

 

Common steps,

Attach Electrode lead wires to the Spark generator according to the guide. Install the Spark Generator on the control panel. secure into place with plastic nut. Insert AA battery and screw on cap. Clean up wires with the Zip Tie provided. ensure wire leads are kept out of direct flame. If there is an open port on the spark Generator one of the electrode lead wires will need to be grounded. affix the Ground Lug to the a metal leg or side shelf, with the self tapping Short Srew.

 

 

Trade terms:

  1. Payment: By T/T or Western Union or Paypal

       100% payment if the total amount is less than USD 10,000

       30%deposit and 70% balance before shipment if the total amount is more than USD 10,000.

  1. Lead time: 5-15 working days, subject to the order quantity
  2. Delivery way: DHL UPS door to door service, by sea, by air, etc.
  3. MOQ: 1000pcs

 

Welcome to purchase replacement ignitor kits!

Our factory is the direct factory to produce every parts of the kits, igniters, electrodes, cables with different connector size, igniter bush buttons and so on.

You can only order the igniters or cables alone, or compose the parts you need.

For example, you need a kit inculdes: a igniter with 3 outlets, a battery. a cable connect electrode and igniter, a ground cable, electrode. you also need them packed with a box or plastic shell with your logo. That's OK. Welcome to customize your products!